010-151 Actual Questions Answers PDF 100% Cover Real Exam Questions [Q27-Q50]

Share

010-151 Actual Questions Answers PDF 100% Cover Real Exam Questions

010-151 Exam questions and answers 


Training Course for 010-151 Test

The official course available for 010-151 test is self-paced and is referred to as ‘Supporting Cisco Data Center System Devices (DCTECH)’. After purchasing it, you will be able to access it for six months. However, learning itself can last from seven to eight hours. The target audience includes engineers and other professionals who operate system devices for Cisco’s data center.

As you go through this program, you will discover varied modules. The information in them is provided in the form of text, graphical images, interactivities, in addition to videos that demonstrate the right procedures utilized in the diagnosis and resolution of common issues. With such knowledge. You will improve your skills and perform your duties as a support technician more effectively. Note that the course also pays attention to the question of speed for finding the solution.

Anyone with aspirations to gain hands-on skills can take this training as it has no prerequisites. So, even if you have never been exposed to any Cisco-based technologies or gadgets, you can still enroll in the course and go through it without many challenges.

 

NEW QUESTION 27
Refer to the exhibit.

What is the name of this rack-mount server?

  • A. Cisco UCS C420 Rack-Mount Server
  • B. Cisco UCS C220 Rack-Mount Server
  • C. Cisco UCS C460 Rack-Mount Server
  • D. Cisco UCS C240 Rack-Mount Server

Answer: A

 

NEW QUESTION 28
Which three firmware components does the Host Upgrade Utility upgrade? (Choose three.)

  • A. System BIOS
  • B. Fabric Interconnect firmware
  • C. CIMC
  • D. LAN on Motherboard
  • E. Cisco UCS Manager

Answer: A,C,D

 

NEW QUESTION 29
Refer to the exhibit.

Where is the best place to see bootflash free space?

  • A. A - Available Memory
  • B. B - Total Memory
  • C. D - High Availability Details
  • D. C - Local Storage Information

Answer: D

 

NEW QUESTION 30
Which two statements are true about the Cisco UCS C4200 Rack server and UCS C125 M5 compute node?
(Choose two.)

  • A. 2666-MHz DDR4 memory and 24 DIMM slots for up to 3 TB of total memory
  • B. 8 NVIDIA SXM2 V100 32G modules with NVLink interconnect
  • C. Over 45 TB of storage, with up to six small-form-factor 2.5-inch direct-attached drives per node
  • D. AMD EPYC 7000 series processors, with up to 32 cores per socket
  • E. Optional dual USB ports for increased storage or boot drive capacity

Answer: C,E

 

NEW QUESTION 31
Cisco UCS 5100 Blade Server Chassis supports which two devices? (Choose two.)

  • A. S-Series Storage servers
  • B. Rack-mount Servers
  • C. Blade servers
  • D. Fiber Extenders
  • E. E-Series Servers

Answer: B,C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-5100-series- blade-server-chassis/data_sheet_c78-526830.html

 

NEW QUESTION 32
Which device provides analysis of Fibre Channel traffic without any network disruption?

  • A. Cisco MDS 9000 Port Analyzer Adapter
  • B. Cisco MDS 9000 Channel Analyzer Device
  • C. Cisco MDS 9000 Data Analyzer Adapter
  • D. Cisco MDS 9000 Channel Analyzer Adapter

Answer: A

 

NEW QUESTION 33
Refer to the exhibit.

Which three options are features of the Cisco UCS 6248UP Fabric Interconnect front panel? (Choose three.)

  • A. Fan module
  • B. USB port
  • C. Console port
  • D. 10 Gb/s port
  • E. FCoE port

Answer: A,B,C

 

NEW QUESTION 34
Which group of UCS Virtual Interface Cards is exclusively designed for Cisco UCS C-Series Rack Server?

  • A. VIC 1440, VIC 1340, VIC 1388, VIC 1280, M81KR VIC
  • B. M81KR VIC, VIC 1497, VIC 1340, VIC 1387, VIC 1240
  • C. VIC 1455, VIC 1497, VIC 1385, VIC 1387, VIC 1225
  • D. VIC 1455, VIC 1480, VIC 1385, VIC 1340, VIC 1280

Answer: C

Explanation:
Explanation
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/interfaces-modules/unified-computing-system- adapters/datasheet-c78-741130.html

 

NEW QUESTION 35
Which five things should the administrator verify after performing maintenance or replacing a blade server? (Choose five.)

  • A. hard drive status
  • B. mezzanine card status
  • C. host OS boot status
  • D. CPU status
  • E. blade server status
  • F. fan and power status
  • G. memory DIMM status

Answer: A,B,D,E,G

 

NEW QUESTION 36
Which command can be used to exit to EXEC mode from this current mode?
switch(config-if) #

  • A. end
  • B. exit
  • C. quit
  • D. Ctrl-L
  • E. Ctrl-C

Answer: A

 

NEW QUESTION 37
Which two statements about Cisco UCS 6454 Fabric Interconnect are true? (Choose two.)

  • A. All Ethernet ports can support FCoE.
  • B. Provides both the LAN and SAN connectivity for all servers within its domain.
  • C. It hosts and runs Cisco Integrated Management Controller (CIMC).
  • D. Provides the management and communication backbone for the Cisco UCS 5108 Server Chassis and Cisco UCS B-Series Blade Servers only.
  • E. 1-RU 10/25/40/100/200/400 Gigabit Ethernet, FCoE, and Fibre Channel switch offers up to 32 ports.

Answer: A,B

 

NEW QUESTION 38
If the Overall Status for a Cisco UCS B-Series Blade Server indicates a failure in the Cisco UCS Manager, such as discovery-failed, which statement is true?

  • A. The endpoints on that server cannot be upgraded.
  • B. The server is online, but the administrator cannot assign a service profile to that blade.
  • C. The server shuts down.
  • D. The server automatically reboots reboot in 3 minutes.

Answer: A

 

NEW QUESTION 39
Which two statements about DIMM replacement in Cisco UCS Servers are true? (Choose two.)

  • A. If the memory in a server is not fully populated, you can install DIMMs in any open slot.
  • B. In servers that require pairs of DIMMs, the pairs must be identical (manufacturer, size, part #, and so on).
  • C. Rack-mount and blade servers have memory fault LEDs that indicate which DIMM requires attention.
  • D. In blade servers, DIMMs can be installed in either 1, 2, 4, or 8 DIMMs per channel.

Answer: B,D

 

NEW QUESTION 40
Refer to the exhibit.

Which call-out accurately shows the current running version of the Cisco UCS Manager management software?

  • A. C - Interface Card 1 running version 1.4(1m)
  • B. B - IO Module 1 running version 1.4(1m)
  • C. A - UCS Manager running version 1.4(1m)
  • D. D - Kernel running version 4.2(1)N(1.4m)

Answer: C

 

NEW QUESTION 41
Which two statements about FCoE are true? (Choose two.)

  • A. It allows Ethernet traffic to run over a Fibre Channel infrastructure.
  • B. Encapsulates Ethernet frames into Fibre Channel frames, which allows them to run alongside traditional IP traffic.
  • C. Allows Fibre Channel and Ethernet networks to share a single, integrated infrastructure.
  • D. Consolidates I/O traffic in the data center.
  • E. Increases capital costs due to the difficulty to manage.

Answer: C,D

 

NEW QUESTION 42
Which two major components does a Cisco Nexus 1000V Series Switch have? (Choose two.)

  • A. Virtual Fiber Channel Module
  • B. Virtual Ethernet Module
  • C. Virtual Memory Controller Module
  • D. Virtual Supervisor Module
  • E. Virtual Network Module

Answer: B,D

 

NEW QUESTION 43
Refer to the exhibit.

Where is the best place to see the power supply status of the blade server enclosure?

  • A. E - Fabric Interconnects A - PSUs
  • B. C - Chassis1 - Servers
  • C. B - Chassis 1 - PSUs
  • D. A - Chassis 1
  • E. D - Rack-Mounts - Servers

Answer: C

 

NEW QUESTION 44
After installation or replacement of a Cisco UCS C-Series Rack-Mount Server, the host does not boot.
Which four options should be verified? (Choose four.)

  • A. Reseat the mezzanine card connector.
  • B. Verify the power source to the equipment.
  • C. Check the Cisco IMC for fan faults.
  • D. Check for loose HDD cables.
  • E. Reseat the DIMMs, CPU, and PCI cards.
  • F. Verify that power supplies are receiving power.
  • G. Check the CPU sockets for bent pins.

Answer: B,E,F,G

 

NEW QUESTION 45
Which two statements about the Ethernet media are true? (Choose two.)

  • A. The twinax cables can be found in either a shielded twisted-pair or an unshielded twisted-pair variation.
  • B. A passive twinax cable can carry an Ethernet signal over 5m.
  • C. A twisted-pair cable system has each pair of wires twisted together to reduce electromagnetic interference.
  • D. 40 Gigabit Ethernet twinax cables deploy Enhanced Quad Small Form Factor Pluggable (QSFP+) connectors.
  • E. Compared to multimode fiber, the single-mode fiber is designed for shorter distances with higher cost.

Answer: C,D

 

NEW QUESTION 46
Refer to the exhibit.

Where is the best place to find the B200 BIOS version used in a specific Cisco UCS Manager version?

  • A. B - Packages
  • B. C - Images
  • C. A - Installed Firmware
  • D. E - Management Extension
  • E. D - Capability Catalog

Answer: A

 

NEW QUESTION 47
Which fiber optic cable type is used most often with a Subscriber connector?

  • A. multi-mode
  • B. dual-mode
  • C. subscriber-mode
  • D. single-mode
  • E. straight-mode

Answer: D

 

NEW QUESTION 48
Refer to the exhibit.

What does it mean when item 7 (System Status LED) has a blinking red status?

  • A. Power on Self-Test (POST) failed
  • B. Major fault with memory DIMM
  • C. Major fault with the system board
  • D. Secure boot validation has failed
  • E. Power shut down by software

Answer: A

 

NEW QUESTION 49
Refer to the exhibit.

Which call-out accurately shows the current running version of the Cisco UCS Manager management software?

  • A. C - Interface Card 1 running version 1.4(1m)
  • B. B - IO Module 1 running version 1.4(1m)
  • C. A - UCS Manager running version 1.4(1m)
  • D. D - Kernel running version 4.2(1)N(1.4m)

Answer: C

 

NEW QUESTION 50
......

PassSureExam 010-151  Exam Practice Test Questions : https://www.passsureexam.com/010-151-pass4sure-exam-dumps.html

Pass 010-151 Exam Info and Free Practice Test : https://drive.google.com/open?id=1u3JIDmvdVKXE22XQVv9rur80TDVvswj0