[Apr 09, 2024] NSE7_LED-7.0 Test Engine files, NSE7_LED-7.0 Dumps PDF
Latest Fortinet NSE7_LED-7.0 PDF and Dumps (2024) Free Exam Questions Answers
Fortinet NSE7_LED-7.0 (Fortinet NSE 7 - LAN Edge 7.0) certification exam is one of the most popular and highly sought-after certifications in the IT industry. Fortinet NSE 7 - LAN Edge 7.0 certification is designed for IT professionals who want to validate their skills and knowledge in configuring, managing, and troubleshooting Fortinet LAN Edge solutions.
NEW QUESTION # 13
Which two statements about the MAC-based 802 1X security mode available on FortiSwitch are true? (Choose two.)
- A. FortiSwitch authenticates each device connected to the port
- B. FortiSwitch authenticates a single device and opens the port to other devices connected to the port
- C. It cannot be used in conjunction with MAC authentication bypass
- D. FortiSwitch can grant different access levels to each device connected to the port
Answer: A,D
Explanation:
Explanation
According to the FortiSwitch Administration Guide, "MAC-based 802.1X security mode allows you to authenticate each device connected to a port using its MAC address as the username and password." Therefore, option B is true because it describes the MAC-based 802.1X security mode available on FortiSwitch. Option D is also true because FortiSwitch can grant different access levels to each device connected to the port based on the user group and security policy assigned to them. Option A is false because FortiSwitch does not authenticate a single device and open the port to other devices connected to the port, but rather authenticates each device individually. Option C is false because MAC-based 802.1X security mode can be used in conjunction with MAC authentication bypass (MAB) or EAP pass-through modes, which are fallback options for non-802.1X devices.
NEW QUESTION # 14
Which two statements about FortiSwitchmanager are true1? (Choose two)
- A. FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes
- B. Any switch discovered or authorized on FortiGate must be added manually on FortiSwitch manager
- C. If the administrator makes any changes on FortiSwitch manager they must also install those changes on FortiGate so that those changes are applied on the managed switches
- D. Per-device management is the default management mode on FortiManager
Answer: A,C
Explanation:
Explanation
According to the FortiManager Administration Guide1, "FortiManager obtains the FortiSwitch status information by querying the FortiGate REST API every three minutes." Therefore, option B is true because it describes how FortiManager gets the information about the managed switches. According to the same guide2,
"If you make any changes in this module, you must install them on your managed device so that they are applied on your managed switches." Therefore, option C is true because it describes what the administrator must do after making any changes on FortiSwitch manager. Option A is false because central management is the default management mode on FortiManager, not per-device management. Option D is false because anyswitch discovered or authorized on FortiGate will be automatically added on FortiSwitch manager, not manually.
1: https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager 2:
https://docs.fortinet.com/document/fortimanager/7.0.0/administration-guide/734537/fortiswitch-manager#fortisw
NEW QUESTION # 15
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?
- A. The FortiGate ARP table is missing entries
- B. The native VLAN configured on the ports is incorrect
- C. The FortiSwitch MAC address table is missing entries
- D. Access VLAN is enabled on the VLAN
Answer: C
Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.
NEW QUESTION # 16
Which two pieces of information can the diagnose test authserver ldap command provide? (Choose two.)
- A. It displays the LDAP codes returned by the LDAP server
- B. It displays the LDAP groups found for the user
- C. It displays whether the admin bind user credentials are correct
- D. It displays whether the user credentials are correct
Answer: A,D
Explanation:
Explanation
According to the FortiGate CLI Reference Guide, "The diagnose test authserver ldap command tests LDAP authentication with a specific LDAP server. The command displays whether the user credentials are correct and whether the user belongs to any groups that match a firewall policy. The command also displays the LDAP codes returned by the LDAP server." Therefore, options B and C are true because they describe the information that the diagnose test authserver ldap command can provide. Option A is false because the command does not display whether the admin bind user credentials are correct, but rather whether the user credentials are correct. Option D is false because the command does not display the LDAP groups found for the user, but rather whether the user belongs to any groups that match a firewall policy.
NEW QUESTION # 17
Which CLI command should an administrator use to view the certificate verification process in real time?
- A. diagnose debug application fnbamd -1
- B. diagnose debug application foauthd -1
- C. diagnose debug application authd -1
- D. diagnose debug application radiusd -1
Answer: B
Explanation:
Explanation
According to the FortiOS CLI Reference Guide, "The diagnose debug application foauthd command enables debugging of certificate verification process in real time." Therefore, option A is true because it describes the CLI command that an administrator should use to view the certificate verification process in real time. Option B is false because diagnose debug application radiusd -1 enables debugging of RADIUS authentication process, not certificate verification process. Option C is false because diagnose debug application authd -1 enables debugging of authentication daemon process, not certificate verification process. Option D is false because diagnose debug application fnbamd -1 enables debugging of FSSO daemon process, not certificate verification process.
NEW QUESTION # 18
You are configuring a FortiGate wireless network to support automated wireless client quarantine using IOC Which two configurations must you put in place for a wireless client to be quarantined successfully? (Choose two)
- A. Configure the wireless network to be in bridge mode
- B. Configure the FortiGate device in the Security Fabric with a FortiAnalyzer device
- C. Configure a firewall policy to allow communication
- D. Configure the wireless network to be in tunnel mode
Answer: B,D
Explanation:
Explanation
According to the FortiGate Administration Guide, "To enable automated wireless client quarantine using IOC, you must configure the following settings: Configure your wireless network to be in tunnel mode. This allows FortiGate to inspect all wireless traffic and applysecurity policies. Configure your FortiGate device in the Security Fabric with a FortiAnalyzer device. This allows FortiAnalyzer to detect indicators of compromise (IOC) from wireless traffic and send quarantine commands to FortiGate." Therefore, options A and B are true because they describe the configurations that must be put in place for a wireless client to be quarantined successfully using IOC. Option C is false because configuring a firewall policy to allow communication is not required, as the default firewall policy for tunnel mode wireless networks is to allow all traffic. Option D is false because configuring the wireless network to be in bridge mode is not supported, as FortiGate cannot inspect or quarantine wireless traffic in bridge mode.
NEW QUESTION # 19
Where can FortiGate learn the FortiManager IP address or FQDN for zero-touch provisioning'?
- A. From a TFTP server
- B. From an LDAP server using a simple bind operation
- C. From a DNS server using A or AAAA records
- D. From a DHCP server using options 240 and 241
Answer: C
Explanation:
Explanation
According to the FortiGate Administration Guide, "FortiGate can learn the FortiManager IP address or FQDN for zero-touch provisioning from a DNS server using A or AAAA records. The DNS server must be configured to resolve the hostname fortimanager.fortinet.com to the IP address or FQDN of the FortiManager device." Therefore, option D is true because it describes the method for FortiGate to learn the FortiManager IP address or FQDN for zero-touch provisioning. Option A is false because LDAP is not used for zero-touch provisioning. Option B is false because TFTP is not used for zero-touch provisioning. Option C is false because DHCP options 240 and 241 are not used for zero-touch provisioning.
NEW QUESTION # 20
An administrator is testing the connectivity for a new VLAN The devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate Quarantine is disabled on FortiGate While testing the administrator noticed that devices can ping FortiGate and FortiGate can ping the devices The administrator also noticed that inter-VLAN communication works However intra-VLAN communication does not work Which scenario is likely to cause this issue?
- A. The FortiGate ARP table is missing entries
- B. The native VLAN configured on the ports is incorrect
- C. The FortiSwitch MAC address table is missing entries
- D. Access VLAN is enabled on the VLAN
Answer: C
Explanation:
Explanation
According to the scenario, the devices in the VLAN are connected to a FortiSwitch device that is managed by FortiGate. Quarantine is disabled on FortiGate, which means that the devices are not blocked by any security policy. The devices can ping FortiGate and FortiGate can ping the devices, which means that the IP connectivity is working. Inter-VLAN communication works, which means that the routing between VLANs is working. However, intra-VLAN communication does not work, which means that the switching within the VLAN is not working. Therefore, option C is true because the FortiSwitch MAC address table is missing entries, which means that the FortiSwitch does not know how to forward frames to the destination MAC addresses within the VLAN. Option A is false because access VLAN is enabled on the VLAN, which means that the VLAN ID is added to the frames on ingress and removed on egress. This does not affect intra-VLAN communication. Option B is false because the native VLAN configured on the ports is incorrect, which means that the frames on the native VLAN are not tagged with a VLAN ID. This does not affect intra-VLAN communication. Option D is false because the FortiGate ARP table is missing entries, which means that FortiGate does not know how to map IP addresses to MAC addresses. This does not affect intra-VLAN communication.
NEW QUESTION # 21
Which two statements about MAC address quarantine by redirect mode are true? (Choose two)
- A. It is the default mode for MAC address quarantine
- B. The quarantined device is moved to the quarantine VLAN
- C. The device MACaddress is added to the Quarantined Devices firewall address group
- D. The quarantined device is kept in the current VLAN
Answer: C,D
Explanation:
Explanation
According to the FortiGate Administration Guide, "MAC address quarantine by redirect mode allows you to quarantine devices by adding their MAC addresses to a firewall address group called Quarantined Devices.
The quarantined devices are kept in their current VLANs, but their traffic is redirected to a quarantine portal." Therefore, options B and D are true because they describe the statements about MAC address quarantine by redirect mode. Option A is false because the quarantined device is not moved to the quarantine VLAN, but rather kept in the current VLAN. Option C is false because redirect mode is not the default mode for MAC address quarantine, but rather an alternative mode that can be enabled by setting mac-quarantine-mode to redirect.
https://docs.fortinet.com/document/fortiap/7.0.0/configuration-guide/734537/radius-authenticated-dynamic-vlan-: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/734537/mac-address-quarantine
NEW QUESTION # 22
Refer to the exhibit.
By default FortiOS creates the following DHCP server scope for the FortiLink interface as shown in the exhibit What is the objective of the vci-string setting?
- A. To restrict the IP address assignment to FortiSwitch and FortiExtender devices
- B. To restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname
- C. To reserve IP addresses for FortiSwitch and FortiExtender devices
- D. To ignore DHCP requests coming from FortiSwitch and FortiExtender devices
Answer: A
Explanation:
Explanation
According to the exhibit, the DHCP server scope for the FortiLink interface has a vci-string setting with the value "Cisco AP c2700". This setting is used to match the vendor class identifier (VCI) of the DHCP clients that request an IP address from the DHCP server. The VCI is a text string that uniquely identifies a type of vendor device. Therefore, option C is true because the vci-string setting restricts the IP address assignment to FortiSwitch and FortiExtender devices, which use the VCI "Cisco AP c2700". Option A is false because the vci-string setting does not ignore DHCP requests coming from FortiSwitch and FortiExtender devices, but rather accepts them. Option B is false because the vci-string setting does not reserve IP addresses for FortiSwitch and FortiExtender devices, but rather assigns them dynamically. Option D is false because the vci-string setting does not restrict the IP address assignment to devices that have FortiSwitch or FortiExtender as their hostname, but rather to devices that have "Cisco AP c2700" as their VCI.
NEW QUESTION # 23
A wireless network in a school provides guest access using a captive portal to allow unregistered users to self-register and access the network The administrator is requested to update the existing configuration to provide captive portal authentication through a secure connection (HTTPS) Which two changes must the administrator make to enforce HTTPS authentication"? (Choose two >
- A. Update the captive portal URL to use HTTPS on FortiGate and FortiAuthenticator
- B. Disable HTTP administrative access on the guest SSID to enforce HTTPS connection
- C. Create a new SSID with the HTTPS captive portal URL
- D. Enable HTTP redirect in the user authentication settings
Answer: A,D
Explanation:
Explanation
According to the FortiGate Administration Guide, "To enable HTTPS authentication, you must enable HTTP redirect in the user authentication settings. This redirects HTTP requests to HTTPS. You must also update the captive portal URL to use HTTPS on both FortiGate and FortiAuthenticator." Therefore, options B and D are true because they describe the changes that the administrator must make to enforce HTTPS authentication for the captive portal. Option A is false because creating a new SSID with the HTTPS captive portal URL is not required, as the existing SSID can be updated with the new URL. Option C is false because disabling HTTP administrative access on the guest SSID will not enforce HTTPS connection, but rather block HTTP connection.
NEW QUESTION # 24
Refer to the exhibits
The exhibits show the wireless network (VAP) SSID profiles defined on FortiManager and an AP profile assigned to a group of APs that are supported by FortiGate None of the APs are broadcasting the SSlDs defined by the AP profile Which changes do you need to make to enable the SSIDs to broadcast?
- A. Enable one channel in the Channels section
- B. In the SSIDs section enable Manual and assign the networks manually
- C. Enable multiple channels in the Channels section and enable Radio Resource Provision
- D. In the SSIDs section enable Tunnel
Answer: A
Explanation:
Explanation
According to the FortiManager Administration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled." Therefore, enabling one channel in the Channels section will allow the SSIDs to broadcast.
NEW QUESTION # 25
Refer to the exhibit.
Examine the FortiGate user group configuration and the Windows AD LDAP group membership information shown in the exhibit FortiGate is configured to authenticate SSL VPN users against Windows AD using LDAP The administrator configured the SSL VPN user group for SSL VPN users However the administrator noticed that both the student and j smith users can connect to SSL VPN Which change can the administrator make on FortiGate to restrict the SSL VPN service to the student user only?
- A. In the SSL VPN user group configuration, change Name to cn=sslvpn, CN=users, DC=trainingAD, Detraining, DC-lab.
- B. In the SSL VPN user group configuration change Type to Fortinet Single Sign-On (FSSO)
- C. In the SSL VPN user group configuration set Group Name to ::;=Domain users.CN-Users/DC=trainingAD, DC-training, DC=lab.
- D. In the SSL VPN user group configuration set Group Nam to CN-SSLVPN, CN="users, DC-trainingAD, DC-training, DC-lab
Answer: D
Explanation:
Explanation
According to the FortiGate Administration Guide, "The Group Name is the name of the LDAP group that you want to use for authentication. The name must match exactly the name of the LDAP group on the LDAP server." Therefore, option A is true because it will set the Group Name to match the LDAP group that contains only the student user. Option B is false because changing the Name will not affect the authentication process, as it is only a local identifier for the user group on FortiGate. Option C is false because setting the Group Name to Domain Users will include all users in the domain, not just the student user. Option D is false because changing the Type to FSSO will require a different configuration method and will not solve the problem.
NEW QUESTION # 26
Refer to the exhibit.
Examine the FortiSwitch security policy shown in the exhibit
If the security profile shown in the exhibit is assigned to all ports on a FortiSwitch device for 802 1X authentication which statement about the switch is correct?
- A. FortiSwitch cannot authenticate multiple devices connected to the same port
- B. All EAP messages will be terminated on FortiSwitch
- C. FortiSwitch will try to authenticate non-802 1X devices using the device MAC address as the username and password
- D. FortiSwitch will assign non-802 1X devices to the onboarding VLAN
Answer: D
Explanation:
Explanation
According to the FortiSwitch Administration Guide, "If a device does not support 802.1X authentication, you can configure the switch to assign the device to an onboarding VLAN. The onboarding VLAN is a separate VLAN that you can use to provide limited network access to non-802.1X devices." Therefore, option C is true because it describes the behavior of FortiSwitch when the security profile shown in the exhibit is assigned to all ports. Option A is false because FortiSwitch can authenticate multiple devices connected to the same port using MAC-based or MAB-EAP modes. Option B is false because FortiSwitch will not try to authenticate non-802.1X devices using the device MAC address as the username and password, but rather use MAC authentication bypass (MAB) or EAP pass-through modes. Option D is false because all EAP messages will be terminated on FortiGate, not FortiSwitch, when using 802.1X authentication.
NEW QUESTION # 27
Refer to the exhibit
Examine the FortiGate RSSO configuration shown in the exhibit
FortiGate is configured to receive RADIUS accounting messages on port3 to authenticate RSSO users The users are located behind port3 and the internet link is connected to port1 FortiGate is processing incoming RADIUS accounting messages successfully and RSSO users are getting associated with the RSSO Group user group However all the users are able to access the internet, and the administrator wants to restrict internet access to RSSO users only Which configuration change should the administrator make to fix the problem?
- A. Change the RADIUS Attribute Value selling to match the name of the RADIUS attribute containing the group membership information of the RSSO users
- B. Enable Security Fabric Connection on port3
- C. Add RSSO Group to the firewall policy
- D. Create a second firewall policy from port3 lo port1 and select the target destination subnets
Answer: C
Explanation:
Explanation
According to the exhibit, the firewall policy from port3 to port1 has no user group specified, which means that it allows all users to access the internet. Therefore, option B is true because adding RSSO Group to the firewall policy will restrict internet access to RSSO users only. Option A is false because changing the RADIUS Attribute Value setting will not affect the firewall policy, but rather the RSSO user group membership. Option C is false because enabling Security Fabric Connection on port3 will not affect the firewall policy, but rather the communication between FortiGate and other Security Fabric devices. Option D is false because creating a second firewall policy from port3 to port1 will not affect the existing firewall policy, but rather create a redundant or conflicting policy.
NEW QUESTION # 28
An administrator has configured an SSID in bridge mode for corporate employees All APs are online and provisioned using default AP profiles Employees are unable to locate the SSID to conned Which two configurations can the administrator verify? (Choose two)
- A. Verify that the broadcast SSID option is enabled in the SSID configuration
- B. Verify that the Block Intra-SSID Traffic (intra-vap-privacy) option in the SSID configuration is disabled
- C. Verify that the SSID is manually applied on AP profiles for both 2 4 GHz and 5 GHz radios
- D. Verify that the SSID to an AP group that should be broadcasting the SSID is applied
Answer: A,D
Explanation:
Explanation
According to the FortiAP Configuration Guide1, "To enable the SSID, you must select at least one channel for the radio. If no channels are selected, the SSID will not be enabled. You must also enable Broadcast SSID." Therefore, option A is true because the broadcast SSID option allows the SSID to be visible to wireless clients.
Option C is also true because the SSID must be applied to an AP group that contains the APs that should be broadcasting the SSID. According to the same guide1, "You can create AP groups and assign them to different locations or departments. You can then apply different settings, such as SSIDs, to each group." Option B is false because blocking intra-SSID traffic prevents wireless clients on the same SSID from communicating with each other, which is not related to broadcasting the SSID. Option D is false because the SSID can be applied to an AP group or a global profile, which will automatically apply to all APs, without manually configuring each AP profile.
NEW QUESTION # 29
......
Becoming certified in the Fortinet NSE 7 - LAN Edge 7.0 Exam can help IT professionals advance their careers and demonstrate their expertise in managing and securing LAN edge networks. Fortinet NSE 7 - LAN Edge 7.0 certification can also help organizations ensure that their network security professionals have the knowledge and skills necessary to protect their networks from advanced threats.
Pass Your NSE 7 Network Security Architect NSE7_LED-7.0 Exam on Apr 09, 2024 with 40 Questions: https://www.passsureexam.com/NSE7_LED-7.0-pass4sure-exam-dumps.html
NSE7_LED-7.0 Free Exam Study Guide! (Updated 40 Questions): https://drive.google.com/open?id=1T8cyuo1J_1C6BVgGbB0hLsVa-vaShEqH