JN0-362 Revolutionary Guide To Exam Juniper Dumps
JN0-362 Free Study Guide! with New Update 67 Exam Questions
Juniper JN0-362 Exam Topics:
| Section | Objectives |
|---|---|
| Protocol-Independent Routing | Identify the concepts, operation, or functionality of various protocol-independent routing components
Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
|
| Multiprotocol Label Switching (MPLS) | Identify the concepts, operation, or functionality of MPLS
Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
|
| Layer 2 Bridging or VLANs | Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
Identify the concepts, benefits, or functionality of VLANs
Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
|
| Tunnels | Identify the concepts, requirements, or functionality of IP tunneling
Demonstrate knowledge of how to configure, monitor, or troubleshoot IP tunnels
|
| IPv6 | Identify the concepts, operation, or functionality of IPv6
Demonstrate knowledge of how to configure, monitor, or troubleshooting IPv6
|
| Border Gateway Protocol (BGP) | Identify the concepts, operation, or functionality of BGP
Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
|
| High Availability | Identify the concepts, benefits, applications, or requirements of high availability
Demonstrate knowledge of how to configure, monitor, or troubleshoot high availability components
|
Certification Path
JN0-362 is an fundamental course and requires no certification as a pre-requisite.
NEW QUESTION 19
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. R3 will not participate in the election process
- B. R4 will be the designated router
- C. R2 will be the designated router
- D. R1 will not participate in the election process
Answer: A
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/configuring-ospf- areas.html#id-example-controlling-ospf-designated-router-election
NEW QUESTION 20
Before configuring an RSVP LSP in your network, you first apply a baseline configuration to all of the routers.Which three configuration elements are minimally required in the baseline? (Choose three.)
- A. family mpls on the transit interfaces
- B. protocols mpls for the appropriate interfaces
- C. protocols ldp for the appropriate interfaces
- D. family mpls on the loopback interface
- E. protocols rsvp for the appropriate interfaces
Answer: A,B,E
NEW QUESTION 21
Which two statements are correct about default BGP route propagation? (Choose two.)
- A. EBGP speakers advertise IBGP-learned routes to other EBGP peers.
- B. IBGP speakers advertise IBGP-learned routes to other IBGP peers.
- C. IBGP speakers advertise EBGP-learned routes to other IBGP peers.
- D. EBGP speakers advertise IBGP-learned routes to other EBGP peers by using apolicy.
Answer: C,D
NEW QUESTION 22
Click the exhibit.
A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C,D
NEW QUESTION 23
In your RSVP network you have configured three separate LSPs to the same egress address. You have made no other configuration changes to the forwarding decisions made by the router.Which commands can you use to determine which LSP is being used to forward packets?
- A. show rsvp session
- B. show route table inet.4
- C. show route table inet.3
- D. show rsvp neighbor
Answer: C
NEW QUESTION 24
What is the TTL value for EBGP?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 25
Click the Exhibit button.
Which type of route is shown in the exhibit?
- A. aggregate
- B. generate
- C. static
- D. kernel
Answer: B
NEW QUESTION 26
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Interface ge-1/0/0.0 can only form a single adjacency
- B. Interface xe-0/0/0.0 can only form a single adjacency
- C. Interface ge-3/0/0.0 has a default metric of 10
- D. Interface xe-0/0/0.0 has a default metric of 10
Answer: A
NEW QUESTION 27
Click the Exhibit button.
Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)
- A. to remove the tunnel interface from inet.0 after the hold-time expires
- B. to reduce the risk of forwarding traffic through a stateless tunnel
- C. to mark the tunnel down after the hold-time expires
- D. to mark the tunnel up after the hold-time expires
Answer: B,C
NEW QUESTION 28
Click the Exhibit button.
You are asked to configure OSPF for the network? Referring to the exhibit, how should Area 1 be configured?
- A. not-so-stubby area
- B. totally stubby area
- C. backbone area
- D. stub area
Answer: D
NEW QUESTION 29
To which multicast address is a VRRP advertisement packet sent?
- A. 224.0.0.6
- B. 224.0.0.22
- C. 224.0.0.18
- D. 224.0.0.13
Answer: C
Explanation:
Explanation/Reference: https://tools.ietf.org/html/rfc3768
NEW QUESTION 30
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/task/configuration/layer-2-services- mac-bridge-domain-or-logical-interface-disabling-learning-for.html
NEW QUESTION 31
Click the exhibit.
In the exhibit, which two routers will perform a swap action on LSP1? (Choose two.)
- A. R1
- B. R2
- C. R3
- D. R4
Answer: A,B
NEW QUESTION 32
Which two statements are correct about the BGP MED attribute? (Choose two.)
- A. BGP uses the MED value when peering to two different upstream ASs
- B. BGP uses the MED value when peering to two or more connections to the same upstream AS
- C. BGP assumes the MED value to be 0, if not already defined
- D. BGP routes require the MED attribute be defined
Answer: B,C
NEW QUESTION 33
What happens when a packet matches a static route with the next hop parameter set to reject?
- A. The packet is forwarded and the packet is marked as rejected in the header
- B. The system silently drops the packet
- C. An ICMP message is sent to the source and the packet is forwarded
- D. An ICMP message is sent to the source and the packet is dropped
Answer: D
NEW QUESTION 34
An IS-IS level 1-only router is configured within a larger multilevel hierarchy. Which OSPF area type resembles the routing information in the L1 router's table?
- A. OSPF stub area
- B. OSPF NSSA with no summaries
- C. OSPF default area
- D. OSPF NSSA
Answer: B
NEW QUESTION 35
You have been asked to provision a service provider's network to accommodate Layer 3 VPNs as defined in RFC 4364.Which three tasks must be performed before the provider network is ready to carry VPN traffic? (Choose three.)
- A. All Juniper Networks PE routers must be configured with a routing-instance containing the CE- facing interface.
- B. All Juniper Networks PE routers must be configured with an appropriate router-ID unique to the VPN.
- C. All Juniper Networks PE routers must be configured with a routing-instance of type forwarding.
- D. All Juniper Networks PE routers must be configured with an appropriate route-target unique to the VPN.
- E. All Juniper Networks PE routers must be configured with a routing-instance of type vrf.
Answer: A,D,E
NEW QUESTION 36
The IPv6 Neighbor Discovery Protocol (NDP) performs the same function as which two IPv4 protocols?
(Choose two.)
- A. ICMP
- B. DNS
- C. ARP
- D. DHCP
Answer: A,C
Explanation:
Explanation/Reference: https://www.juniper.net/documentation/en_US/junos/topics/topic-map/ipv6-neighbor- discovery.html#:~:text=Neighbor%20discovery%20for%20IPv6%20replaces,Discovery%20protocol%20 (NDP)%20messages.
NEW QUESTION 37
Click the Exhibit button.
Referring to the exhibit, which statement is correct?
- A. Routes from 10.3.3.3 are less preferred than the default local preference
- B. Routes from 10.2.2.2 are less preferred than routes from 10.1.1.1
- C. Routes from 10.1.1.1 are less preferred than the default local preference
- D. Routes from 10.1.1.1 are less preferred than routes from 10.2.2.2
Answer: B
NEW QUESTION 38
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the link-local address
- B. the statically assigned address
- C. the multicast address
- D. the loopback address
Answer: A
NEW QUESTION 39
You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.
Which syntax will accomplish this task?
- A. Option D
- B. Option A
- C. Option B
- D. Option C
Answer: D
NEW QUESTION 40
You are deploying an RSVP-based MPLS network in your core. You must ensure that your LSPs are continually analyzing the usage levels and recalculating the best LSP. You also want to ensure that a minimal amount of traffic is lost when an LSP is re-signaled without user intervention.
Which two features must be enabled in this scenario? (Choose two.)
- A. adaptive
- B. class of service
- C. auto-bandwidth
- D. MPLS fast reroute
Answer: C,D
NEW QUESTION 41
......
Get up-to-date Real Exam Questions for JN0-362: https://www.passsureexam.com/JN0-362-pass4sure-exam-dumps.html