NCP-5.15 Exam Dumps, NCP-5.15 Practice Test Questions
PDF (New 2022) Actual Nutanix NCP-5.15 Exam Questions
Difficulty in Preparation of Nutanix NCP-5.15
You need to concentrate on taking the NCP-5.15 pdf dumps if You want to extend your Nutanix Accredited technical career. Nutanix NCP-5.15 exam examination questions are among the top qualification tests that could help you distinguish yourself around the world immediately after the Nutanix Accredited Professional (NCP) 5.15 evaluation questions are passed. To pass the new NCP-5.15, you need to get the latest up-to-date Nutanix NCP-5.15 dumps pdf which allows you to take advantage of the Nutanix Certified Professional (NCP) 5.15 Exam (Beta) test questions along the way. DumpsLink is the perfect factor for your visit to the legitimate Nutanix NCP-5.15 test dumps. As the NCP 5.15 pdf questions provided by the DumpsLink have already been checked by Nutanix experts, they are among the prominent sources of knowledge.
Different NCP-5.15 practice questions are ready to plan, but the actual NCP-5.15 pdf dumps are seen as a much superior solution to the Nutanix Accredited Professional NCP-5.15 review. These Nutanix NCP-5.15 dump queries often come with checked answers to them by Nutanix officials so that the Nutanix Approved Technical Qualification tests play an important role in your achievement. There are different types of practice test are also available to prepare for the certification due to the high level of difficulty of the certification. These practice tests cover all the aspects of the certifications and highlight all the important concepts of the certification.
The Nutanix Accredited Professional (NCP) exam 5.15 (Beta) should be effectively trained since one must answer questions within the short timeframe provided by the applicant. The applicant should take the examination with a fair impact. The NCP 5.15 assessment problems template and queries of the kind that appears on the Nutanix Qualified Professional (NCP) 5.15 Exam (Beta) exam must be thoroughly understood to ensure that passages are taken by the test claimant.
Nutanix NCP 5.15
Nutanix Multicloud Infrastructure Certification
Introduction
Nutanix technology is increasingly developing over time, and you can observe that a new form of Nutanix exam is launched quite often in the IT industry. It demonstrates that you must do something to improve along with activity for students; things that can not only build your career but can also fire your talents and skills in Nutanix. Nutanix invisibly improves infrastructure, raising IT to concentrate its business-enhanced software development applications. The Nutanix Enterprise OS uses a web design to natively converge computation, virtual servers, and processing with rich machinery knowledge into a scalable, software-based solution. This results in sustained success, the consumption of cloud resources, robust security, and smooth platform mobility for a wide variety of business applications. Nutanix also enhanced the field of cloud computing that’s why cloud computation certifications are offered by Nutanix.
For more info read reference:
Nutanix NCP 5.15 leaning site Nutanix NCP 5.15 resources
NEW QUESTION 111
Which bond mode is the default mode on an AHV Nutanix cluster?
- A. Balanced SLB
- B. Active - Backup
- C. Link Aggregation
- D. Balance TCP
Answer: B
NEW QUESTION 112
An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic
1) 2 nodes at both the primary and remote site
2) 60 TB of storage on each node
3) 1.9 TB SSD disks in each node
4) 8 VMs per protection domain
5) A mix of ESXi and AHV hypervisor
What three steps would need to be taken successfully enable Near Sync? (Choose Three)
- A. Increase the amount of VMs in each protection domain to at least 10
- B. Reduce the amount of storage on each node to more than 40 TB
- C. Increase the number of nodes at both sites to a minimum of three
- D. Reduce the SSD disks type 2 no more than 1 TB
- E. Use all AHV or all ESXi hypervisor in the implementations
Answer: A,C,E
NEW QUESTION 113
An administrator needs to bring down a host in a Nutanix Cluster for maintenance reasons. The administrator puts the host in maintenance mode.
What should the administrator do to perform an orderly shutdown of the CVM?
- A. Execute the cvm_shutdown -P new command from the CVM.
- B. Enter Fever off Server - immediate from the IPMI console.
- C. Enter Fewer off Server-orderly Shutdown from the IPMI console.
- D. Execute the cvm_shutdown -P now command from the host.
Answer: A
NEW QUESTION 114
Anti-affinity rules have been configured for two VMs on a Nutanix cluster.
What occurs when an administrator manually live-migrates one VM onto the node hosting the second VM?
- A. The migration succeeds and the VMs continue to run on the host until one VM is manually migrated.
- B. The migration succeeds and the scheduler migrates one VM off of the node after a period of time.
- C. The migration fails because the VM-Host affinity needs to be configured.
- D. The migration fails and an alert is generated in Prism.
Answer: B
NEW QUESTION 115
An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.
Which three steps must the administrator take to increase throughput to the host? (Choose three.)
- A. Connect the 10Gb interfaces to the physical switch.
- B. Change the VLAN ID to a higher priority ID.
- C. Add a new switch to the network and connect 1Gb interfaces to it.
- D. Remove any 1Gb interfaces still connected from the default bond.
- E. Change the bond mode to balance-slb or balance-tcp.
Answer: A,B,E
NEW QUESTION 116
In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.
How should the administrator accomplish this task?
- A. Configure a virtual disk on each VM with identical attributes in the storage dashboard.
- B. Add a disk to one VM and enable read/write on it from the other VM.
- C. Add the volume group to the VM using the update link from the VM dashboard.
- D. Create a shared folder for the VMs using Nutanix Files.
Answer: C
NEW QUESTION 117
What is the function of the virbr0 bridge on AHV?
- A. To carry all traffic between the user VMs and the upstream network.
- B. To carry management and storage communication between user VMs and AHV host.
- C. To carry storage communication between the guest VMs and the CVM
- D. To carry management and storage communication between user VMs and the CVM.
Answer: B
Explanation:
Explanation
http://www.vstellar.com/2019/01/10/ahv-networking-part-1
-basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%2
NEW QUESTION 118
what does an administrator do before shutdown nutanix node for maintenance in the cluster? (Choose two)
- A. reclaim license
- B. shutdown the cluster in that host
- C. verify data resiliency status in the cluster
- D. migrate all guests vm from the host
Answer: C,D
NEW QUESTION 119
Refer to the exhibit.
The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.
What step should be taken to grant the proper access?
- A. Add the hosts to the entities KM for the role.
- B. Add the proper category to each Linux VM.
- C. Add the role to the Linux images.
- D. Grant the admin1 user the viewer role (or the cluster.
Answer: A
NEW QUESTION 120
What provides the most efficient method to delete 20 specific AHV VMs?
- A. Create a script using Postman and REST API.
- B. Create a script using PowerCLI to delete the VMs.
- C. In Prisra Central, select all VMs and click delete.
- D. In Prism Element, select and delete each VM.
Answer: C
NEW QUESTION 121
An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:
* Cluster memory utilization: 64%
* Cluster CPU utilization: 19%
* Cluster storage utilization. 32%
* Average VM CPU utilization: 25%
* Average VM CPU ready%: 24%
* Average VM memory utilization: 60%
Which two changes should the administrator make to improve VM performance? (Choose two.)
- A. Add more memory to the VMs.
- B. Reduce the number of VMs on the hosts.
- C. Reduce the number of vCPUs assigned to VMs.
- D. Replace high core count CPUs with high clock rate CPUs.
Answer: B,D
NEW QUESTION 122
An administrator needs to convert an existing node to be a Compute Only node. Which two steps should the administrator take? (Choose two.)
- A. Image the node as CO using Foundation
- B. Add the node to the cluster using Prism Element
- C. Update the license file
- D. Enable CO mode using aCLI
Answer: A,D
NEW QUESTION 123
In Nutanix clusters, which feature ensures VMs can be migrated and restarted on another host in case of failure?
- A. Host Affinity Rules
- B. Availability Zone
- C. High Availability
- D. Protection Domain
Answer: C
NEW QUESTION 124
An administrator wants to use Volumes to connect to physical servers that are not able to be virtualized.
Which three things must be configured for Volumes to support iSCSI clients? (Choose three)
- A. Data Services IP address
- B. Enable external client access
- C. iSCSI Multipathing I/O
- D. Cluster Virtual IP address
- E. Client OS iSCSI initiator
Answer: A,D,E
Explanation:
Explanation
https://portal.nutanix.com/page/documents/details/?targetId=Web-Console-Guide-Prism-v51:wc-block-services-
NEW QUESTION 125
Which feature, if enabled, can simplify licensing operations?
- A. License Automation
- B. my.nutanix.com
- C. License Bundle
- D. Portal Connection
Answer: A
NEW QUESTION 126
which cli is used to run this command? (cluster version)
- A. ecli
- B. bash shell
- C. acli
- D. ncli
Answer: D
NEW QUESTION 127
......
Updated Jan-2022 Pass NCP-5.15 Exam - Real Practice Test Questions: https://www.passsureexam.com/NCP-5.15-pass4sure-exam-dumps.html