[Nov-2024] Download Real HP HPE6-A73 Exam Dumps Test Engine Exam Questions
New HPE6-A73 exam dumps Use Updated HP Exam
HP HPE6-A73 exam consists of 60 multiple-choice questions that must be completed within 90 minutes. HPE6-A73 exam is conducted in a proctored environment and can be taken either in-person or remotely. The passing score for the exam is 70%, and candidates who pass the exam will receive the Aruba Certified Switching Professional (ACSP) certification.
HPE6-A73 exam is intended for IT professionals who have already earned the Aruba Certified Switching Associate (ACSA) certification and are looking to advance their careers as Aruba experts. HPE6-A73 exam comprises 60 questions that must be answered in 90 minutes, and a passing score of 75% is required to earn the certification.
NEW QUESTION # 30
An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.
What would best meet the administrator's needs when deploying AOS-CX switches?
- A. Dynamic segmentation
- B. VSF
- C. VSX
- D. NAE
Answer: C
NEW QUESTION # 31
Examine the network topology.
The network is configured for OSPF with the following attributes:
Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. ISP 1 is not reachable from any area.
- B. Area 0 has 81 routes
- C. Area 1 has 23 routes
- D. Corel has received one type 5 LSA from the ASBR.
Answer: B
NEW QUESTION # 32
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- B. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
Answer: A
NEW QUESTION # 33
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Core1 has received one LSA Type 5 from the ASBR
- C. Area 0 has 13 routes
- D. Area 1 has 23 routes
Answer: D
NEW QUESTION # 34
A network engineer for a company with 012 users across a multi-building campus wants to gather statistics on an important switch uplink and create actions based on issues that occur on the uplink. How often does an NAE agent gather information from the current state database in regard to the uplink interfaces?
- A. Once every 60 seconds
- B. Once every 30 seconds
- C. Once every 1 second
- D. Once every 5 seconds
Answer: D
NEW QUESTION # 35
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- B. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- C. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: D
Explanation:
"both VSX switches as a PIM Designate Router (DR). One node is the actual DR, the other node is the proxy DR." "Only the actual DR performs multicast routing and forward traffic destined to groups to its downstream VLANs in the data-path." https://www.arubanetworks.com/techdocs/AOS-CX/10.07/HTML/5200-7888/Content/Chp_Pre_tra_loss/ip-mul-rou-10.htm
NEW QUESTION # 36
How is voice traffic prioritized correctly on AOS-CX switches?
- A. By defining device profiles with QOS settings
- B. By implementing voice VLANs
- C. By placing it in the strict priority queue
- D. By implementing weighted fair queueing (WFQ)
Answer: B
NEW QUESTION # 37
Examine the commands entered on an AOS-CX switch:
What is true regarding this configuration for traffic received on interface 100?
- A. The traffic is always dropped if the next-hop addresses are unreachable.
- B. The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2.
- C. The default next-hop address supersedes the two preceding next-hop addresses.
- D. The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable.
Answer: C
NEW QUESTION # 38
Examine the output from an AOS-CX switch implementing a dynamic segmentation solution involving downloadable user roles:
Switch# show port-access role clearpass
Role information:
Name : icxarubadur_employee-3044-2
Type : clearpass
Status: failed, parsing_failed
Reauthentication Period :
Authentication Mode :
Session Timeout :
The downloadable user roles are not being downloaded to the AOS-CX switch. Based on the above output, what is the problem?
- A. The AOS-CX switch does not have the ClearPass certificate involved
- B. The certificate that ClearPass uses in invalid
- C. There is a date/time issue between the ClearPass server and the switch
- D. DNS fails to resolve the ClearPass server's FQDN
Answer: D
NEW QUESTION # 39
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. The port should be configured for 802.1X
- B. The RADIUS request timed out to the AAA server
- C. No downloadable user role exists
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: A
NEW QUESTION # 40
Examine the configuration performed on newly deployed AOS-CX switches:
After performing this configuration, the administrator notices that the switch ports always remain in the EAP start state. What should the administrator do to fix this problem?
- A. Create and assign a local user role to the ports
- B. Define the server group cppm
- C. Set the ports to client-mode
- D. Enable change of authorization (CoA)
Answer: D
NEW QUESTION # 41
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined. A network engineer notices the following command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Implement replay protection for AAA messages
- B. Define the account to implement change of authorization
- C. Speed up the AAA authentication process
- D. Define the account to implement downloadable user roles
Answer: C
Explanation:
Radius service tracking locates the availability of the RADIUS service configured on the switch. It helps to minimize the waiting period for new clients in the unauth-vid (Guest Vlan) when authentication fails because of service is not available, as well as previously authenticated clients in unauth-vid (Guest Vlan) when re-authentication fails because service is not available during the re-authentication period. Note that this feature is disabled by default.
https://techhub.hpe.com/eginfolib/networking/docs/switches/WB/16-02/5200-1650_WB_ASG/content/ch04s04.html
NEW QUESTION # 42
A network administrator is installing NetEdit. In order for NetEdit to manage the AOS-CX switches in the network, what must be defined on the AOS-CX switches? (Choose two.)
- A. Defining an admin user password
- B. Enabling the RESTful API for read and write access
- C. Enabling telnet
- D. Defining the https user-group
- E. Enabling SFTP
Answer: A,B
NEW QUESTION # 43
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concernedthat when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affectnetwork connectivity especially VoIP calls, in the connected access layer switches What should the administrator do on the aggregation layer switches to alleviate this issue?
- A. Implement bidirectional forwarding detection (BFD).
- B. implement route aggregation
- C. Reduce the hello and dead interval timers
- D. implement graceful restart
Answer: A
NEW QUESTION # 44
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- B. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- C. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
- D. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
Answer: A
NEW QUESTION # 45
Examine the network topology.
Company XYZ has two connections to a service provider (ISP1). Here is the configuration of Router1:
Here is the configuration of Router2:
Based on configuration of Router1 and Router2, which BGP metric is being manipulated?
- A. Multiple exit discriminator
- B. AS path length
- C. Local preference
- D. Weight
Answer: A
NEW QUESTION # 46
What is true regarding VSX and keepalives on AOS-CX switches?
- A. The OOBM port must be used.
- B. A separate VLAN on the ISL link is used.
- C. A 1GbE or faster port is used.
- D. A VSX LAG for the keepalives is a best practice.
Answer: C
NEW QUESTION # 47
A company has implemented 802.1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA. Each switch has the two servers defined.A network engineer notices thefollowing command configured on the AOS-CX switches:
radius-server tracking user-name monitor password plaintext aruba123
What is the purpose of this configuration?
- A. Implement replay protection for AAA messages
- B. Define the account to implement change of authorization
- C. Speed up the AAA authentication process
- D. Define the account to implement downloadable user roles
Answer: C
NEW QUESTION # 48
An AOS-CX switch is configured to implement downloadable user roles. Examine the AOS-CX switch output:
Based on this output, what is the state of the user's access?
- A. The port should be configured for 802.1X
- B. The RADIUS request timed out to the AAA server
- C. No downloadable user role exists
- D. MAC authentication has passed, but 802.1X authentication is in progress
Answer: A
NEW QUESTION # 49
What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?
- A. Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- B. Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
- C. Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing
- D. Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN
Answer: D
NEW QUESTION # 50
The company has just upgraded their access layer switches with AOS-CX switches and implemented an AAA solution with ClearPass. The company has become concerned about what actually connects to the user ports on the access layer switch, Therefore, the company is implementing 802.1X authentication on the AOS-CX switches. An administrator has globally enabled 802.1X, and has enabled it on all the access ports connected to user devices, including VoIP phones, security cameras, and wireless Aruba IAPs. Wireless users are complaining that they successfully authenticate to the IAPs; however, they do not have access to network resources. Previously, this worked before 802.1X was implemented on the AOS-CX switches.
What should the company do to solve this problem?
- A. Implement local user roles and local forwarding on the AOS-CX switches.
- B. Implement downloadable user roles and user-based tunneling (UBT) on the AOS-CX switches.
- C. Implement device-based mode on the lAP-connected AOS-CX switch ports.
- D. Implement AAA RADIUS change of authorization on the AOS-CX switches.
Answer: B
NEW QUESTION # 51
A network has two AOS-CX switches connected to two different service providers The administrator is concerned about bandwidth consumption on the service provider links and learned that the service providers were using the company as a transit AS.
Which feature should the administrator implement to prevent this situation?
- A. Configure bi-directional forwarding detection on both switches.
- B. Configure route maps and apply them to BGP
- C. Configure the two switches as route reflectors.
- D. Configure a classifier policy to disable MED.
Answer: B
NEW QUESTION # 52
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any group web-servers group web-ports
Answer: B
NEW QUESTION # 53
How does PIM build the IP multicast routing table to route traffic between a multicast source and one or more receivers?
- A. It uses IGMP and calculates a shortest path tree (SPT)
- B. It uses the shortest path first (SPF) algorithm derived from link state protocols
- C. It uses the unicast routing table and reverse path forwarding (RPF)
- D. It uses the Bellman-Ford algorithm derived from distance vector protocols
Answer: C
NEW QUESTION # 54
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any web-servers group web-ports
- B. access-list ip server 10 permit tcp any web-servers web-ports
- C. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- D. access-list ip server 10 permit tcp any group web-servers group web-ports
Answer: B
NEW QUESTION # 55
......
Pass Your HPE6-A73 Dumps as PDF Updated on 2024 With 130 Questions: https://www.passsureexam.com/HPE6-A73-pass4sure-exam-dumps.html
Verified HPE6-A73 Dumps Q&As - HPE6-A73 Test Engine with Correct Answers: https://drive.google.com/open?id=1CGGlHwjvwXoMLixKUkuRcXhLzPvsvak1