[Oct 31, 2021] 301 Ultimate Study Guide - PassSureExam
Ultimate Guide to Prepare 301 Certification Exam for F5 Networks Certification Study Materials in 2021
NEW QUESTION 13
Which two statements are true concerning capabilities of current BIG-IP platforms?
(Choose two.)
- A. The 1600 hosts more ports than the 3900.
- B. All current BIG-IP platform use both an ASIC. And CPU(s)to process traffic.
- C. All current BIG-IP platform can perform hardware compression.
- D. All BIG-IP have capacity to perform bulk encryption I decryption of SSL traffic independent of the CPU.
- E. Only 2U BIG-IP Platform have an option of a second power supply.
Answer: B,D
NEW QUESTION 14
A monitor has been defined with an alias port of 443. All other options are left at their defaults. The administrator
wishes to assign it to a pool of members where the members' ports vary. Which is the result?
- A. This assignment is not allowed since the port do not match.
- B. For each member. If it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member for each member, if it is running an SSL service at the member port, the monitor may work. Otherwise, the monitor will fail and the member will be marked down.
- C. For each member, if the member port is not 443, the member will be marked down. For each member,if the member? Port is not 443, the member will be marked down.
- D. For each member, the monitor will test member node at port 443. For each member, the monitor will test the member ? node at port 443.
Answer: D
NEW QUESTION 15
An LTM has the 3 virtual servers, 2 SNATs, four self IP addresses defined and the networks shown in the graphic below. Selected options for each object are shown below. Settings not shown are at their defaults.
Assume port exhaustion has not been reached. VirtualServerl Destination: 10.10.2.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap configured VirtualServer2 Destination: 10.10.2.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: 10.10.0.0 netmask 255.255.0.0 SNATAddress: SNAT Pool with 2 members- 172.16.20.50 and 192.168.10.50 SNAT2 Source IP: All Addresses SNAT Address: 10.10.2.102 Floating Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.10.50:2222 and a destination IP and port of 10.10.2.102:80. When the request is processed, what will be the source and destination IP addresses?
- A. Source IP: 10.20.10.50; Destination IP: pool member in the 192.168/16 network
- B. Source IP: 182.16.1.1; Destination IP: pool member in the 172316/16 network
- C. The request will be dropped.
- D. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168./16 network
- E. Source IP: 192.168.10.50; Destination IP: pool member in the 192.168/16 network
- F. Source IP: 192.168.1.1; Destination IP: pool member in the 192.168/16 network
- G. Source IP: 10.20.10.50; Destination IP: pool member in the 172.16/16 network
- H. Source IP: 172316.20.50; Destination IP: pool member in the 182.16/16 network
Answer: B
NEW QUESTION 16
What does the nsert XForwarded For?
option in an HTTP profile do?
What does the ?nsert XForwarded For?option in an HTTP profile do?
- A. The client IP addresses are inserted into messages sent to remote syslog servers.
- B. The client IP addresses are inserted into HTTP header.
- C. A BIG-IP self-IP is inserted in the source address field on the server-sid connection.
- D. A BIG-IP self-IP is inserted in the source address field on the clint-side connection.
Answer: B
NEW QUESTION 17
A BIG-IP has the following objects configured: A SNAT pool with 2 members:
150.10.33.33 and 10.10.1.33 A load-balancing pool with 5 members:
10.10.1.1-10.10.1.5:80
The BIG-IP has two self-IP addresses: 150.10.10.10 and 10.10.1.10 A virtual server at 150.10.30.30:80 that is associated with both the SNAT pool and the load-balancing pool. If a client at IP address 200.10.10.10 initiates a connection to the virtual server, what will the source IP address be in the packets sent to the chosen pool member?
- A. 150.10.30.30
- B. 200.10.10.10
- C. 10.10.1.33
- D. It could be any of the addresses of the members of the load-balancing pool.
- E. 150.10.33.33
- F. 10.10.1.10
Answer: C
NEW QUESTION 18
When a pool is created and saved to file, where is the default file and location for the pool configuration? When a pool is created and saved to file, where is the default file and location for the pool configuration?
- A. /config/BigDB.dat
- B. /etc/bigip_base.conf
- C. /config/bigip_base.conf
- D. lconfig/bigip.conf
Answer: D
NEW QUESTION 19
A BIG-IP has two SNATs, a pool of DNS servers and a virtual server configured to load-balance UDP traffic to the DNS servers. One SNAT's address is 64.100.130.10; this SNAT is defined for all addresses.
The second SNAT's address is 64.100.130.20; this SNAT is
defined for three specific addresses, 172.16.3.54, 172.16.3.55, and 172.16.3.56. The virtual server's destination is
64.100.130.30:53.
The SNATs and virtual server have default VLAN associations. If a client with IP address 172.16.3.55 initiates a request to the virtual server, what is the source IP address of the packet as it reaches the chosen DNS server?
- A. 172.16.3.55
- B. 64.100.130.20
- C. 64.100.130.30
- D. 64.100.130.10
Answer: B
NEW QUESTION 20
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. the value in the tcp acknowledgement field
- B. any bytes within the initial client request packet
- C. an IP address
- D. any text string within a cookie
Answer: C,D
NEW QUESTION 21
Which are immediate results of entering the following command: b pool PoolA . { lb method predictive member 10.10.1 .1:80 member 10.10.1.2:80 }
- A. No changes will take place since the command is missing the monitor component for PoolA.
- B. Requests sent to this BIG-IP system with a destination port of 80 are load-balanced between the members of Pool
- C. a new pool is available for association with any iRule or virtual server.
- D. The /config/bigip.cinf file is updated to include a definition for the pool named PoolA.
Answer: C
NEW QUESTION 22
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. Users with advance shell access have the same right as those with msh access, but the right extend to all partition rather than to Users with advance shell access have the same right as those with msh access, but right extend to all partition rather than to a single partition.
- B. Users with advance shell access are limited to changing, adding, or deleting LTM object in any single partition. Users with? Advance shell accesses are limited to changing, adding, or deleting LTM object on any single partition.
- C. Users with advanced shell access can always change, add, or delete LTM objects in all partition. Users with? Advanced shell access can always, change, add, or delete LTM objects in all partitions.
- D. All Users can be given advanced shell access. All users can be given advance shell access.
Answer: C
NEW QUESTION 23
How is traffic flow through transparent virtual servers different from typical virtual servers?
- A. Traffic flow through transparent virtual severs is not load balabced.
- B. traffic flow through transparent virtual servers must be forwarded through a single routing device.
- C. Traffic flow through transparent virtual servers is bridged ( leave IP and MAC.addresses intact) rather than routed (leave IP address intact but change the MAC.addresses).
- D. traffic flow through transparent virtual servers soes not have IP address translation performed.
Answer: D
NEW QUESTION 24
QUESTION NO: 34. Click the Exhibit Button an LTM has the 3 virtual servers, a SNAT defined, four self IP addresses defined and the networks shown in the exhibit. Selected options for each object are shown below. Settings not shown are at their defaults. VirtualServer 1 Destination: 10.10.1.102:80 netmask 255.255.255.255 Pool: Pool with 3 members in the 172.16/16 network SNAT Automap enabled VirtualServer2 Destination: 10.10.1.102:* netmask 255.255.255.255 Pool: Pool with 3 members in the 192.168/16 network VirtualServer 3 Destination: 10.10.2.0:80 netmask 255.255.255.0 Type: IP Forwarding SNATI Source IP: All Addresses SNAT Address: SNAT Pool with 2 members -
172.16.20.50 and
192.168.10.50 Self IPs 192.168.1.1; 172.16.1.1; 10.10.2.1; 10.10.1.1 A connection attempt is made with a source IP and port of 10.20.100.50:80 and a destination IP and port of 10.10.2.10:80. When the request is processed, what will be the source and destination IP addresses?
- A. The request will be dropped.
- B. Source IP: 10.20.100.50; Destination IP: 10.10.2.10
- C. Source IP: Either 172.16.20.50 or 192.168.10.50; Destination IP: 10.10.2010
- D. Source IP: 10.10.2.1; Destination IP: 10.10.2.10
Answer: C
NEW QUESTION 25
How many events can be referenced in a given iRule?
- A. Exactly one.
- B. iRules can have up to event if one is client-side and one is server-side.
- C. iRules can have multiple events.
- D. iRules are limited to one event, but a virtual server could be associated with multiple rules.
Answer: C
NEW QUESTION 26
Which is a potential result when a trunk is configured on a BIG-IP?
- A. Packets flowing to the VLAN could arrive on any of the interfaces in the trunk
- B. VLAN fail-safe is not available for any VLAN associated with any trunks.
- C. Since any VLANs associated with the trunk are necessarily associated with multiple interfaces, the VLAN using the must use tagged packets.
- D. No additional trunks can be configuration since each BIG-IP is limited to one trunk
Answer: A
NEW QUESTION 27
Which two processes are involved when BIG-IP systems issue traps? (Choose two.)
- A. bigd
- B. syslog-ng
- C. alertd
- D. smtpd
Answer: B,C
NEW QUESTION 28
What is the expected difference between two source address persistence profiles if profile A has a mask of 255.255.255.0 and profile B has a mask of 255.255.0.0?
- A. Profile B will have fewer persistence records for the sane client base.
- B. Profile A will have more clients matching existing persistence records.
- C. Profile B has a greater potential number of persistence records.
- D. There are no detectable differences.
Answer: A
NEW QUESTION 29
Which statement describes advanced shell access correctly?
Which statement describes advanced shell access correctly?
- A. The context has no impact on events.
- B. The context determines which pools are available for load balancing.
- C. The context determines which events are available for iRule processing.
- D. The context determines the values of commands that vary between client and server.
Answer: D
NEW QUESTION 30
......
F5 Networks Certification Study Materials Fundamentals-301 Exam-Practice-Dumps: https://www.passsureexam.com/301-pass4sure-exam-dumps.html