UPDATED [Feb 14, 2023] Pass Specialist - Implementation Engineer, PowerStore Solutions Exam Exam with Latest Questions
DES-1221 Exam Practice Questions prepared by EMC Professionals
NEW QUESTION 11
What describes the remote replication Failover operation?
- A. It is run from the replication destination system by the administrator in the event of a source system outage
- B. It is run from the replication source system by the administrator in the event of an outage on the system
- C. It is run automatically by the replication destination system in the event of a source system outage
- D. It is run automatically by the replication source system in the event of a source system outage
Answer: A
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-protect-data/replication?guid=guid-
7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-us
NEW QUESTION 12
What is the maximum number of snapshot rules per cluster?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
NEW QUESTION 13
Refer to the Exhibit.
What happens to the parent resource of thin clone 3 if thin clone 2 is deleted?
- A. Thin clone 3 has an empty parent
- B. Thin clone 1 becomes parent
- C. Snapshot 3 becomes the parent
- D. Thin clone 3 becomes parent
Answer: A
NEW QUESTION 14
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the Node is offline
Appliance failure status
Node utilization - B. Whether the Cluster is offline
Node failure status
I/O utilization - C. Whether the appliance is online
Appliance failure status
Cluster utilization - D. Whether the appliance is offline
Appliance failure status
Capacity utilization
Answer: D
Explanation:
Reference: https://volumes.blog/2020/05/18/what-is-powerstore-part-11-resource-balancer/
NEW QUESTION 15
How is the upgrade process on a multi-appliance cluster run?
- A. On one node at a time
- B. On all primary nodes first, then peer nodes
- C. In parallel on all nodes
- D. Master appliance primary node first, then the peer node
Answer: A
Explanation:
Explanation
Upgrade
The upgrade process runs on a single node at a time:
Starts with the primary appliance
Non-primary node first
Control Path
Turns off all schedulers
Disable RestAPI for writes
Waits for ongoing management operations to complete
Backs up management DB
Disables Primary Appliance Failover
GUI and RestAPI are unavailable for a short period of time during Control Path failover
NEW QUESTION 16
What does a Storage Administrator need to consider about Resource Balance when assigning volumes?
- A. Whether the appliance is online Appliance failure status
Cluster utilization - B. Whether the appliance is offline Appliance failure status Capacity utilization
- C. Whether the Node is offline Appliance failure status Node utilization
- D. Whether the Cluster is offline Node failure status
I/O utilization
Answer: B
NEW QUESTION 17
When a Volume is selected for the intercluster migration, what other data services associated with the volume will also be moved with it?
- A. Thin Clones and File systems
- B. Thin Clones and snapshots
- C. NAS Servers and File.systems
- D. Replications and Volume Groups
Answer: B
NEW QUESTION 18
What does the data import session Pause operation do?
- A. Stops the source to PowerStore background copy operation
- B. Deactivates the host to PowerStore control path
- C. Stops the source to PowerStore cutover operation
- D. Deactivates the host to PowerStore data path
Answer: A
Explanation:
Reference:
guid=guid-a19dffc3-8def-4a50-a4ed-14650500f567&lang=en-us
NEW QUESTION 19
Refer to the Exhibit.
Note the yellow arrow. A Data Center Engineer notices that the LED is blinking blue and amber alternating at one second intervals. What does this indicate?
- A. Node is Degraded
- B. System not initialized
- C. Node in Service Mode
- D. System is booting
Answer: C
NEW QUESTION 20
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?
- A. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
- B. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
- C. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
- D. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster
Answer: B
Explanation:
Reference:
https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/h18149- dell-emc-powerstore-platform-introduction.pdf
NEW QUESTION 21
A SQL Cluster with attached PowerStore storage has Volumes SQL1, SQL2, SQL4, SQL5 which all require write order preservation. The SQL administrator no longer requires SQL4 and has removed it from the database. The Storage Administrator goes to delete volume SQL4 and finds that the option is grayed out.
Why is the option to delete the volume unavailable?
- A. SQL4 was renamed from SQL3
- B. SQL4 still has snapshots
- C. SQL4 still has replications
- D. SQL4 is part of a volume group
Answer: C
NEW QUESTION 22
What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?
- A. Select the RSA key for configuring the control path HTTPS certificate
- B. Configure the network port and interface for the host data path
- C. Configure the network port and interface for the management control path
- D. Select the folder location on the host for the program installation
Answer: C
NEW QUESTION 23
What describes the remote replication Failover operation?
- A. It is run from the replication destination system by the administrator in the event of a source system outage
- B. It is run from the replication source system by the administrator in the event of an outage on the system
- C. It is run automatically by the replication destination system in the event of a source system outage
- D. It is run automatically by the replication source system in the event of a source system outage
Answer: A
NEW QUESTION 24
An administrator received the following alert from PowerStore regarding a previously created NAS server?
Description:
The SMB server of the NAS server PowerStore_NAS_01 is configured to be joined to the domain test.mid, but is currently not joined.
Which setting should the administrator change?
- A. SMB
- B. LDAP
- C. NTP
- D. UDS
Answer: A
Explanation:
Reference:
https://www.dell.com/support/article/en-pk/sln317202/powerstore-alerts-smb-server-alerts?lang=en
NEW QUESTION 25
An administrator is trying to set a performance policy while creating a Thin Clone of a volume group. Why is the option to set performance policy unavailable?
- A. Volumes in the volume group are not mapped to any hosts
- B. No Volumes are added in the volume group
- C. Thin Clones cannot be created using a volume group
- D. Performance policy can only be set on a Thin Clone volume
Answer: D
Explanation:
Reference:
https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/remove-a-volume-from-a- volume-group?guid=guid-4b974223-26e4-40fe-a1b8-01beb210c305&lang=en-us
NEW QUESTION 26
Which administrator tasks are needed to increase the size of a VMFS datastore without the use of the VSI plugin, mounted to an external ESXi host?
- A. Change the volume size in PowerStore Manager and refresh the size of the datastore in vSphere
- B. Change the size of the datastore in vSphere and refresh the size of the volume in PowerStore Manager
- C. Change the size of the datastore in vSphere and restart the VAAI service in PowerStore Manager
- D. Change the volume size in PowerStore Manager and restart the VASA service in vSphere
Answer: A
NEW QUESTION 27
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?
- A. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
- B. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
- C. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster
- D. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
Answer: C
NEW QUESTION 28
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?
- A. NAS appliance failover is incorrectly configured
- B. Trial license is expired
- C. Resource balancer service has failed
- D. Master appliance is off-line
Answer: A
NEW QUESTION 29
What is a way to verify the data path connectivity between a source VNX2 storage system and the PowerStore system when configuring an import session?
- A. Verify host initiators on PowerStore Manager
- B. Use the VNX2 SP ping operation
- C. Examine Fibre Channel zoning
- D. Review Server Manager MPIO properties
Answer: B
NEW QUESTION 30
......
DES-1221 Exam Practice Materials Collection: https://www.passsureexam.com/DES-1221-pass4sure-exam-dumps.html
Use Valid New DES-1221 Questions - Top choice Help You Gain Success: https://drive.google.com/open?id=1__-MdZ1adrEdCdtvrAojcx-LWljGSJak